How to Change Aspect Ratio in DaVinci Resolve
DaVinci Resolve Tutorial · Timelines & Delivery

How To Change Aspect Ratio
in DaVinci Resolve

Change it for the whole project, for one timeline, or add cinematic bars without touching your resolution. Then fill the frame and export it without the ratio snapping back.

By: Titto S. Updated: October 2026 Skill level: Beginner to Intermediate Tested in: Resolve 20
Quick Answer

To change aspect ratio in DaVinci Resolve, press Shift + 9 to open Project Settings, go to Master Settings, set Timeline resolution (width first, so 1080 × 1920 for vertical), and click Save. To change just one timeline, right-click it in the Media Pool, open its Timeline Settings, and uncheck Use Project Settings first. For cinematic bars with no resolution change, use Timeline → Output Blanking. Before you render, check that the Deliver page resolution matches your timeline.

The 60-Second Workflow
  • Whole project — Shift + 9 → Master Settings → Timeline resolution → Save
  • One timeline only — right-click it in the Media Pool → Timelines → Timeline Settings → uncheck Use Project Settings
  • Cinematic bars — Timeline → Output Blanking → pick a ratio
  • Fill the frame — Project Settings → Image Scaling → Scale full frame with crop
  • Before rendering — Deliver page → Resolution must match your timeline
Read This First

The Four Levels That Control Aspect Ratio in Resolve

Many creators change Project Settings, then wonder why the viewer looks the same, or why the export still comes out 16:9. That's because the shape of your video is set in four separate places, and they don't always agree.

Knowing which one you're changing saves a lot of confusion. Pick the method you need below, and when something looks wrong, check the four in this order: project, timeline, clip, then Deliver.

The four levels that control aspect ratio in DaVinci Resolve
LevelWhat it controlsWhere
1. ProjectThe default every new timeline starts withProject Settings (Shift + 9)
2. TimelineA timeline's own resolution, if it has broken away from the projectTimeline Settings
3. ClipHow each clip is scaled and positioned inside the frameInspector and Image Scaling
4. DeliverThe size of the exported fileDeliver page → Render Settings
Decide the ratio first

Choose your delivery ratio before you place titles and graphics. Footage can be reframed afterwards, but a lower third positioned for 16:9 will land in the wrong place in a 9:16 frame and need moving by hand.

If you only need to change the pixel size without changing the shape, see our guide to changing timeline resolution in DaVinci Resolve.

Cheat Sheet

Aspect Ratios & Resolutions Worth Keeping Note

Resolve asks for pixel dimensions rather than ratios, and width always comes first. A vertical Full HD timeline is 1080 × 1920. Typing 1920 × 1080 out of habit gives you a horizontal one, which is an easy mistake to make.

Common aspect ratios and their pixel resolutions
RatioResolution (W × H)Where it's used
16:9 horizontal1920 × 1080 · 3840 × 2160YouTube, TV, client masters
9:16 vertical1080 × 1920 · 2160 × 3840TikTok, Reels, Shorts
1:1 square1080 × 1080Instagram and Facebook feeds
4:5 portrait1080 × 1350Instagram feed posts
2.39:1 scope1920 × 803 · 3840 × 1608 · 4096 × 1716Cinematic widescreen, or use Output Blanking (Method 4)
4:3 classic1440 × 1080Archival and retro looks
Odd ratios

For a ratio that isn't a preset, keep your width and divide: height = width ÷ ratio. For 2.39:1 at 3840 wide, 3840 ÷ 2.39 is about 1607, so use 1608 and choose Custom. An even number is the safer choice.

Method 1 of 4

Project Settings: Change Everything at Once

This method is recommended when you're starting a project, or when the whole project should switch shape. Every new timeline starts with this resolution, and existing timelines that are still following the project will update too. Your clips won't reposition themselves, so see the reframing section afterwards.

1
Open Project Settings

Go to File → Project Settings, press Shift + 9, or click the gear icon in the bottom-right corner.

2
Set the timeline resolution

On the Master Settings tab, open Timeline resolution. Pick a preset, or choose Custom and type the width, then the height.

3
Check the frame rate while you're here

The timeline frame rate can't be changed on an existing timeline, so set it to match your footage before you start editing.

4
Save

Click Save at the bottom right. The viewer should show the new frame shape.

Project Settings → Master Settings with Timeline resolution set to Custom 1080 × 1920
Project Settings → Master Settings → Timeline resolution.
If nothing changes

A timeline with Use Project Settings unchecked keeps its own resolution and ignores this panel. If the viewer stays the same shape, change the timeline directly using Method 2.

Method 2 of 4

One Timeline Only: Different Ratios, One Project

Use this when you want a 16:9 master and a 9:16 cutdown in the same project, or when you need to reshape a single existing timeline. The key is one checkbox: Use Project Settings. Unchecked, the timeline keeps its own format.

1
For a new timeline

Press Ctrl/⌘ + N or go to File → New Timeline. In the dialog, uncheck Use Project Settings to show the extra tabs.

2
Set the resolution on the Format tab

Enter your width and height. For vertical, you can also tick Use vertical resolution to swap them for you.

3
For an existing timeline

Right-click it in the Media Pool and choose Timelines → Timeline Settings. Uncheck Use Project Settings, set the new resolution on the Format tab, and apply it. Clips stay where they are, and only the canvas changes shape.

4
Duplicate before you convert

Finish your master first. Then right-click it in the Media Pool and choose Duplicate Timeline once per format. Give each copy its own resolution, name them clearly (Master 16:9, Reels 9:16), and reframe each separately.

Method 3 of 4

Cut Page: One-Click Format Presets

The Cut page has a format switcher next to the viewer. It's the quickest way to flip a timeline to a common social format, but it only offers presets.

1
Open the Cut page

Click the Cut icon in the page bar at the bottom, just left of Edit.

2
Find the format dropdown

Look in the top-right of the viewer, near the Fullscreen button. It shows the current timeline format with a small arrow.

3
Pick a preset

Choose a format such as portrait or square. The timeline switches straight away, and you can go back to the Edit page and carry on.

For 2.39:1, 4:5 or any custom size, use Method 1 or 2 instead.

Cut page viewer To Change Aspect Ratio
in DaVinci Resolve
The Cut page.
Method 4 of 4

Output Blanking: Cinematic Bars, No Resolution Change

For the widescreen film look, you often don't need to change the timeline resolution at all. Output Blanking mattes your existing timeline to a cinema ratio, and the bars are included in the render. Your resolution and delivery size stay the same.

1
Apply the blanking

With the timeline open, go to Timeline → Output Blanking and choose a ratio such as 2.39. Black bars appear at the top and bottom.

2
Check each shot inside the bars

The mattes hide part of the image, so check headroom. Adjust a clip's Position Y in the Inspector to keep the subject well placed.

3
Render as normal

Export at your usual 16:9 resolution. You get a standard-size file with the bars built in.

When you need a true scope file

If a delivery spec asks for a file that is itself 2.39:1, skip blanking and set a custom resolution with Method 1 or 2, for example 4096 × 1716.

Timeline → Output Blanking menu with 2.39 selected
Timeline → Output Blanking.
The Second Half of the Job

Reframing Footage to Fill the New Frame

Changing the timeline is only half the work. If you put 16:9 footage into a 9:16 timeline, Resolve's default is to fit the whole image and fill the rest with black. These Image Scaling options (under Project Settings → Image Scaling) control what happens to clips that don't match the timeline shape.

Image Scaling options and their effect in a 9:16 timeline
OptionWhat it doesIn a 9:16 timeline
Scale entire image to fitFits the whole frame inside the timelineA band of video with black above and below
Scale full frame with cropFills the timeline and crops the overflowFrame filled, sides cropped, centre kept
Center crop with no resizingNo scaling, shows the middle at its own sizeDepends on the source resolution
Stretch frame to all cornersDistorts the image to fillSqueezed, rarely usable

Switching the default to Scale full frame with crop is the fastest way to convert a whole 16:9 edit to vertical. Every clip fills the frame, and you only fix the shots where the crop misses the subject.

1
Reframe one clip in the Inspector

Select the clip, open the Inspector, and under Transform raise Zoom until the frame fills, then adjust Position X to centre the subject. With the default fit scaling, filling a 9:16 frame from 16:9 footage needs a Zoom of about 3.16. If you've set Image Scaling to crop, Zoom 1.0 already fills it and you only adjust position.

2
Copy the framing to similar shots

Copy the adjusted clip, select the others, then use Edit → Paste Attributes and tick only the transform settings.

3
Follow a moving subject

Click the keyframe diamond next to Position, then move the playhead and reposition. Resolve fills in the movement between keyframes.

4
Automate it with Smart Reframe (Studio)

DaVinci Resolve Studio includes Smart Reframe, which tracks the subject and reframes for you. Select a clip in a vertical or square timeline and look for it in the Inspector. Premiere Pro's equivalent is Auto Reframe, covered in our guide to resizing video in Premiere Pro.

Reframing tools and which Resolve version has them
ToolWhat it helps withVersion
Smart ReframeSubject-tracking reframe for vertical or squareStudio
Super ScaleAI upscaling when a heavy crop leaves HD footage softStudio
Paste AttributesCopying transform settings across many clipsFree
Adjustment ClipOne transform applied to everything beneath itFree
Output BlankingCinema mattes without changing resolutionFree
Delivery

Exporting Without the Ratio Snapping Back

The Deliver page is the fourth level, and the most common place a correct edit turns into a wrong file. A render preset can carry its own resolution, so a 1920 × 1080 preset can squeeze your vertical timeline back into a horizontal frame.

1
Check Resolution first

On the Deliver page, in Render Settings, make sure Resolution matches your timeline. If it doesn't, set it manually, for example 1080 × 1920 for vertical.

2
Check the render range

Leftover In and Out points can trim your export. Our guide to removing In and Out points in DaVinci Resolve covers the fix.

3
Pick a format that suits the platform

H.264 in an MP4 is a safe choice for most social platforms. Follow the platform's own upload recommendations for bitrate.

4
Queue and render

Click Add to Render Queue, then render. If you're exporting several timelines in different ratios, check the Resolution field each time you add a job.

Saving one render preset per delivery format (for example Reels 1080 × 1920) helps you avoid this mistake.

Common Issues

When It Goes Wrong

The clip shrank and now has black bars on all four sides

This usually means two mismatched fits are stacking: the clip is fitted into the timeline, and then that frame is fitted again into a different output resolution. Make the Deliver page resolution match your timeline exactly, and check your Image Scaling settings.

My export came out 16:9 even though the timeline is vertical

A Deliver page preset with a different resolution probably overrode it. Set Resolution manually to your timeline's dimensions, add the job to the queue again, and re-render.

The footage looks soft after zooming in to fill the frame

Filling a vertical frame from HD footage uses only a narrow slice of the picture, scaled up, so it will look softer. Shooting or editing from 4K source footage helps. In Studio, Super Scale can upscale the clip first. Our guide to upscaling video in DaVinci Resolve covers the options.

I changed Project Settings and nothing happened

The timeline probably has Use Project Settings unchecked. Open its Timeline Settings (Method 2) and change it there.

The golden rule

When the ratio misbehaves, check the four levels in order: Project, Timeline, Clip, Deliver. One of them disagrees with the rest, and it's usually the timeline's Use Project Settings checkbox or the Deliver page resolution.

Common Questions

FAQ

How do I change aspect ratio without cropping my footage?

Keep Scale entire image to fit in Image Scaling, so Resolve fits the whole frame and fills the rest with black. If you want a cinematic widescreen look, use Output Blanking instead, which crops nothing and doesn't change your resolution.

What resolution should I use for 9:16 vertical?

1080 × 1920 for Full HD vertical, width first. For 4K vertical use 2160 × 3840.

Can the free version of DaVinci Resolve change aspect ratio?

Yes. Project Settings, timeline settings, Output Blanking and Inspector reframing are available without Studio. Smart Reframe and Super Scale are Studio features.

What resolution is 2.39:1?

Common choices are 1920 × 803, 3840 × 1608 and 4096 × 1716. Unless a delivery spec requires a native scope file, a standard 16:9 timeline with Output Blanking is simpler.

How do I make 16:9, 9:16 and 1:1 versions of the same edit?

Finish the master, duplicate the timeline once per format, give each copy its own resolution in Timeline Settings, reframe each one, and check the Deliver resolution for each export.

How To Change Aspect Ratio in DaVinci Resolve: Final Recap

For the whole project, use Project Settings. For one timeline, uncheck Use Project Settings in its Timeline Settings. For cinematic bars, use Output Blanking. Then fill the frame with Image Scaling or the Inspector, and check the Deliver resolution before you render.

Tested in DaVinci Resolve 20. Menu names and locations may differ slightly in other versions.